[1]王添王添.基于web的索道機械設備配件管理系統的研究[J].起重運輸機械,2019,(07):90-92.
 [J].,2019,(07):90-92.
點擊復制

基于web的索道機械設備配件管理系統的研究()
分享到:

《起重運輸機械》[ISSN:1001-0785/CN:11-1888/TN]

卷:
期數:
2019年07期
頁碼:
90-92
欄目:
質量管理
出版日期:
2019-05-30

文章信息/Info

文章編號:
1001-0785(2019)07
作者:
王添王添
北京起重運輸機械設計研究院有限公

北京中聯豐重型機電進出口有限公司

關鍵詞:
font-size: 9pt">索道配件管理系統售后服務 font-size: 9pt">PHP
分類號:
TH235
文獻標志碼:
A
摘要:
針對索道在不斷地設計和創新過程中遇到的,索道配件逐年大量增加,配件中含有龐大的標準、非標及電氣配件以及在項目實施和售后服務過程中配件管理存在的各種問題,建立了索道機械配件的管理系統。該系統以PHP 語言為基礎,采用B /S 結構,以保證數據的完整性、穩定性和安全性。索道企業對配件的生產、采購、銷售過程的動態監控,杜絕了因各種原因導致的在項目建成前后需更換或查詢該配件時,無法準確匹配該配件,實現了企業對索道配件的精確管理,減少人力、物力等的浪費,提高了企業的經濟效益。
Abstract:
In response to the continuous design innovation process of the ropeway, the number of ropeway accessories has increased year by year. The accessories contain a large number of stard, non-stard electrical accessories, as well as various problems in the management of the parts during the project implementation after-sales service. The management system of the ropeway mechanical parts. The system is based on the PHP language uses a B / S structure to ensure data integrity, stability security. The ropeway enterprises dynamic monitoring of the production, procurement sales process of the accessories eliminates the need to accurately match the accessories before after the completion of the project due to various reasons, realizes the precise management of the ropeway accessories. Reduce the waste of manpower material resources improve the economic benefits of enterprises.

相似文獻/References:

[1]王增暉.精糖熟化筒倉技術探討[J].起重運輸機械,2019,(02):130.
 Discussion on the technology of refined sugar conditional silos[J].,2019,(07):130.
[2]宋婷,方俊,鄒浩陽,等.港口大型設備狀態評估及管理信息系統的設計[J].起重運輸機械,2019,(06):54.
[3]劉海波.流動式起重機超起卷揚編碼器安裝方式改進[J].起重運輸機械,2019,(06):91.
 Improve on the Installation of Winch Encoder[J].,2019,(07):91.
[4]楊福芹,李冬,趙順.集裝箱裝車機傾斜液壓缸的動力學分析及優化研究[J].起重運輸機械,2019,(02):52.
 Dynamic Analysis Optimization Research of Inclined Hydraulic Cylinder for Container Loader[J].,2019,(07):52.
[5]陳凱凱,安東,彭駿駿,等.DEM-FEM耦合仿真中載荷轉換方法研究[J].起重運輸機械,2019,(02):62.
 Method of Loadings Transformation in the DEM-FEM Co-Simulation[J].,2019,(07):62.
[6]蒲海洋,王棟,郭安福.一種側方位無避讓立體停車裝置的設計與分析[J].起重運輸機械,2019,(02):75.
 Design analysis of a three-dimensional parking device with no lateral avoidance[J].,2019,(07):75.
[7]吳西輝,金慶好,楊孟虎,等.潔凈環鏈電動葫蘆橋式起重機的設計[J].起重運輸機械,2019,(02):84.
 [J].,2019,(07):84.
[8]劉立成,趙章焰,魯恩順,等.基于攝影測量的鋼結構應力檢測方法[J].起重運輸機械,2019,(02):91.
 Steel structure stress detection method based on photogrammetry[J].,2019,(07):91.
[9]劉煒,鄭波.高速水霧幕流抑塵技術在抓斗式卸船機上的應用[J].起重運輸機械,2019,(02):108.
 Application of high speed water mist curtain dust suppression technology in grab ship unloader[J].,2019,(07):108.
[10]趙麗媛,張遠,崔學強.基于無線通訊設計的垃圾抓斗橋式起重機[J].起重運輸機械,2019,(02):112.
 [J].,2019,(07):112.
[11]李永.一種全自動軋輥搬運起重機的電氣關鍵技術[J].起重運輸機械,2019,(02):119.
 [J].,2019,(07):119.
[12]胡靜波,馮月貴,賈民平,等.基于RCM的門式起重機維修策略系統研究[J].起重運輸機械,2019,(02):121.
 Research on maintenance strategy system for Gantry crane based on RCM[J].,2019,(07):121.
[13]楊海.基于ADAMS的變幅連桿機構優化分析[J].起重運輸機械,2019,(05):67.
 The optimization analysis of luffing linkage mechanism abased on ADAMS[J].,2019,(07):67.

備注/Memo

備注/Memo:
收稿日期:2018-08-15
更新日期/Last Update: 2019-06-04
惊喜复活节免费试玩